New water-based crosslinked polyurethane with advanced resin technology brings the highest protection from a single pack varnish ever developed.
For the ultimate protection of interior and exterior surfaces to an industrial level of finish.
The UV blocking and absorption reduce greying, aging and deterioration of surfaces. Whilst Biocides protect against mildew, mould and fungus.

wood • marine • worktops • doors • furniture • concrete paving • unglazed tiles • slate • brick

drying time: 30-60 minutes • recoat time: 1-2 hours • curing time: Allow 48 hours before heavy use • coverage: 10-20 square metres per litre 

Preparation

Remove all traces of old finishes, dirt, oil, wax and grease. These may have impregnated the surface and can cause failure. Sand in direction of the grain to provide a key. Thoroughly clean after sanding. Instructions in the technical data sheet must be followed. Ensure the product is well mixed but do not shake.

Application

Apply 2 to 3 coats of varnish, with a good quality brush. On new softwood and porous surfaces dilute the first coat 10% with water. Lightly sand wood in between applications to remove any raising of the grain.
For a dead flat finish with high durability and stain resistance, apply two coats of satin followed by one of dead flat.

Caution

Always apply to a test area before starting work. Appearance may vary according to the colour and type of wood and the number of coats. Do not apply over uncured oil paints. 

Storage

Protect from extremes of temperature during storage and application. 

Health, safety and the environment

Non-hazardous. Ensure good ventilation.
Keep out of reach of children.
Contact with eyes - wash immediately with warm water.
Remove excess from tools and mixing vessels before washing in warm soapy water.
Do not empty excess into drains or watercourses.