A unique, clear acrylic varnish that uses nano-technology to protect a wide range of decorative surfaces.

Metal  wood • fabric • paintwork • wallpaper (not vinyl) • plaster work • murals • mouldings

drying time: 1 hour • coverage: 15-20 square metres per litre 

Preparation

All surfaces must be clean and free from dust, dirt, oil and contamination.

Application

Ensure the product is well mixed but do not shake. Thinly apply 2 to 3 coats of varnish. On porous surfaces dilute the first coat with 10% water. When using dead flat finish, for a high level of protection and stain resistance, apply 2 coats of satin then 1 coat of dead flat. 

Caution

Always test for clarity over dark colours. Application over emulsion paint can draw contaminants through the paint film. Should not be applied over uncured oil based products. Test for compatibility before application. Not suitable for exterior bare timber or vinyl wall covering.

Storage

Protect from extremes of temperature during storage and application.

Health, safety and the environment

Non-hazardous. Ensure good ventilation.
Keep out of reach of children.
Contact with eyes - wash immediately with warm water.
Remove excess from tools and mixing vessels before washing in warm soapy water.
Do not empty into drains or watercourses.