1L Stone and Brick Protector

1L Stone and Brick Protector

1L Stone and Brick Protector

Absorbed into the substrate, this high performance coating protects interior and exterior stone and brick for a completely natural finish

A high performance water-based masonry protector and water repellent that penetrates into porous substrates forming a barrier to water, moisture, grease, oil acid, alkali and salts. Suppresses mould and fungal growth and the formation of salts on natural masonry surfaces.
It has a long service life, is highly UV resistant and leaves surfaces looking natural after application.

stone • plaster • brick • slate • flagstones • fireplaces • exposed stone walls • brick walls • stone window ledges

drying time: 15 minutes to 1 hour depending on temperature • coverage: 15-20 square metres per litre , depending on the porosity of the material

 

Preparation

Do not use in temperatures below 5°c/40°f or in very high humidity. Stone and brick protector should be used as supplied, without dilution, by brush, spray or roller.

Application

Mix well before use.
For general applications on masonry, brickwork and stone, a single application will be sufficient.

Caution

Always test on a trial area before application. Apply evenly and do not allow to pool in crevices. Test for clarity over dark colours.
NOTE: A chemical reaction could take place on some substrates such as glass, glazed surfaces, lead or aluminium. Mask these materials before application. In case of contact, rinse thoroughly with water immediately.

Storage

Store in unopened containers in a cool dry place away from direct sunlight. Protect from extremes of temperature during storage and application.


Health, safety and the environment

Non-hazardous. Ensure good ventilation.
Keep out of reach of children.
Contact with eyes - wash immediately with warm water.
Remove excess from tools and mixing vessels before washing in warm soapy water.
Do not empty into drains or watercourses.

 



Regular price £28.25
/
  • In stock, ready to ship
Tax included. Shipping calculated at checkout.

For smaller and light items we send via Royal Mail 24 or 48 Tracked.

For cards and other thin items we send Royal Mail Large Letter (1st or 2nd class)

For larger or heavier items such as 750ml Frenchic Paint we use DPD Next Day service. This is a flat fee up to 20kg.

We cannot send Frenchic products to Northern Ireland.

This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.

More from Polyvine
100ml Clear Heavy Duty Extreme Varnish - Dead Flat
£9.99
500ml Clear Decorators Varnish - Dead Flat
£15.65
100ml Clear Heavy Duty Extreme Varnish - Satin
£9.99
1L Clear Heavy Duty Extreme Varnish - Dead Flat
£41.00
100ml Clear Wax Finish Varnish - Dead Flat
£4.95
Recently viewed